IEI Technology NOVA-GM45A, Руководство пользователя, Страница: 72 / 153

NOVA-GM45A Motherboard
Page 60
Pin Description
1-2 Use ATX power
Table 4-2: AT Power Select Jumper Settings
The location of the AT Power Select jumper is shown in Figure 4-5 below.
Figure 4-5: AT Power Select Jumper Location
4.7.2 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type:
3-pin header
Jumper Settings: See
3
Table 4-3
Jumper Location:
See
3
Figure 4-6
If the NOVA-GM45A fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:

Enter the correct CMOS setting