IEI Technology NOVA-8890, Руководство пользователя

Страница: 38 / 49

38
4.11 Peripheral Setup
Peripheral Setup enables you to configure you system to the most effectively
save energy while operating in a user defined system environment.
OnBoard Serial Port1 /Port2
This option specifies the base I/O port address of serial port 1.
Options: Auto (AMIBIOS automatically determines the correct base I/O port
address), Disabled, 3F8h, 2F8h, 2E8h, or 3E8h.
Serial Port2 Mode
This option specifies the IR active pulse or inverting clock of serial port B.
IR Pin Select
The SINB/SOUTB pin of Serial Port B function or IRRX/IRTX pin if IR
function is in normal condition.
OnBoard Parallel Port
This option specifies the base I/O port address of parallel port on the
motherboard.
Options: Disabled, 378h, 278h, or 3BCh.
Parallel Port Mode
This option specifies the parallel port mode.
Options: Normal, Bi-Dir, EPP, and ECP.
Normal:
The normal parallel port mode is used.
Bi-Dir: Use this setting to support bi-directional transfers on the
parallel port.
EPP: The parallel port can be used with devices adhered to the
Enhanced Parallel Port (EPP) specification. EPP uses the
existing parallel port signals to provide asymmetric bi-
directional data transfer driven by the host device.
ECP: The parallel port can be used with devices that adhere to the
Extended Capabilities Port (ECP) specification. ECP uses the
DMA protocol to achieve data transfer rates up to 2.5
Megabits per second. ECP also provides symmetric bi-
directional communication.