IEI Technology NANO-LX Скачать руководство пользователя страница 201

Страница: 201 / 213

NANO-LX CPU Card

201

press

NTER

. A flashing ‘M’ appears at the

Drive Menu

where the member

drives to be included in the RAID1 array can be chosen.

Step 2:

Use the space bar to select members of the RAID1 RAID configuration. The

flashing cursor changes to a lower case ‘m’ once any of the connected disk

drives has been selected. Follow the same method to select another member

drive.

Step 3:

The

Create RAID1(Y/N)

confirm box appears. Press

Step 4:

Enter a nickname for the created array. Upper and lower case alphabetic,

numeric, space, and underscore characters are all applicable for naming an

array.

Step 5:

Once an array is successfully created, it will be seen in the list of configured

arrays.

Step 6:

A prompt will appear to proceed with drive copy. The

Source

and

Destination

drives will be indicated as “M” and “m” in the

Drive Menu

Step 0:

Содержание NANO-LX






















































































































































































































Результаты поиска

Содержание NANO-LX

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology NANO-LX, Руководство пользователя

Результаты поиска

Содержание NANO-LX

Отзывы:

Бренды по названию

Популярные бренды