IEI Technology NANO-HM651 Скачать руководство пользователя страница 119

Страница: 119 / 165

NANO-HM651 EPIC SBC

Page 105

NOTE:

Use the following commands to check if the partitions were created

successfully.

Step 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build the Recovery Partition.

B.2.3 Install Operating System, Drivers and Applications

Install the operating system onto the unlabelled partition. The partition labeled "Recovery"

is for use by the system recovery tool and should not be used for installing the operating

system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Содержание NANO-HM651






































































































































































Результаты поиска

Содержание NANO-HM651

Отзывы:

Похожие инструкции для NANO-HM651

Бренды по названию

Популярные бренды

IEI Technology NANO-HM651, Руководство пользователя

Результаты поиска

Содержание NANO-HM651

Отзывы:

Похожие инструкции для NANO-HM651

Бренды по названию

Популярные бренды