IEI Technology NANO-GX2 Скачать руководство пользователя страница 103

Страница: 103 / 172

NANO-GX2 EPIC NANO Motherboard

Page 87

Channel 0 Master

Channel 0 Slave

Channel 1 Master

Channel 0 Slave

None

If no drives are connected to the IDE channel select

this option. Once set, this IDE channel becomes

inaccessible and any drives attached to it are

undetected.

Auto

EFAULT

) Setting this option allows the device to be

automatically detected by the BIOS.

Manual

Selecting this option allows manual configuration of

the device on the IDE channel in BIOS.

Access Mode [Auto]

The

Access Mode

option can only be configured if the BIOS configuration option is set to

either

Manual

Auto

. Use the

Access Mode

option to determine the hard disk BIOS

translation modes. Most systems now use hard drives with large capacities and therefore

either the LBA translation mode or auto mode should be selected.

CHS

Select this mode if the HDD capacity is less than

504MB.

LBA

Select this mode if the HDD capacity is more than

8.4GB.

Large

This mode is an extended ECHS mode and while it

supports HDDs larger than 504MB, it is not

recommended.

Auto

EFAULT

)

If you are unsure of what access mode to set, select

this option.

Capacity

The

Capacity

specification indicates the storage capacity of the HDD installed in the

system.

Содержание NANO-GX2













































































































































































Результаты поиска

Содержание NANO-GX2

Отзывы:

IEI Technology NANO-GX2, Руководство пользователя, Страница: 103 / 172

Результаты поиска

Содержание NANO-GX2

Отзывы: