IEI Technology NANO-9453 Скачать руководство пользователя страница 20

Страница: 20 / 242

NANO-9453 EPIC Motherboard

Page 2

1.1 Introduction

The NANO-9453 EPIC form factor CPU card is a Socket M Intel® Core™2 Duo, Core™

Duo, Core™ Solo or Celeron® M CPU platform. The NANO-9453 has a maximum front

side bus (FSB) frequency of 667MHz and comes with two VGA interfaces and dual PCI

Express (PCIe) Gigabit Ethernet (GbE) controllers. The NANO-9453 supports up to two,

second-generation 3.0 Gbps serial ATA (SATA) hard disk drives (HDD) and up to six USB

2.0 devices. The NANO-9453 also has a PCI-104 socket and a Mini PCI Express (PCIe)

socket for system expansion. Multiple display support adds versatility to the system

enabling system integrators and designers increased flexibility in selecting display panel

options.

1.1.1 NANO-9453 Benefits

Some of the NANO-9453 benefits are listed below:

Multiple display output options

Storage flexibility with support for SATA II drives, IDE drives and

CompactFlash (CF) disks

Expandable system with PCI-104 and mini PCIe slots

DDR2 support enables faster data transfers

Multiple I/O interfaces provide connectivity to a broad range of external

peripheral devices

1.1.2 NANO-9453 Features

Some of the NANO-9453 features are listed below.

Support for Socket M Intel® Core™ 2 Duo or Core™ Solo CPUs

Maximum FSB of 667MHz

Supports one 200-pin 533MHz or 667MHz 1GB DDR2 SO-DIMM memory

Two SATA II drives with transfer rates of 3.0 Gbps supported

Two Ultra ATA 100, Ultra ATA 66 or Ultra ATA 33 IDE HDDs supported

Six USB 2.0 devices supported

Dual PCIe GbE Ethernet connectivity

Multiple display options including dual VGA-out and dual-channel LVDS

Содержание NANO-9453



















































































































































































































































Результаты поиска

Содержание NANO-9453

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology NANO-9453, Руководство пользователя

Результаты поиска

Содержание NANO-9453

Отзывы:

Бренды по названию

Популярные бренды