manualshive.com logo in svg

IEI Technology NANO-8522, Руководство пользователя, Страница: 156 / 249

Поделиться
Скачать
IEI Technology NANO-8522 Скачать руководство пользователя страница 156

 

 

NANO-8522 EPIC Board

Page 136 

 

Enabled  

OEM Logo displayed instead of POST messages 

 

AddOn ROM Display Mode [Force BIOS] 

Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory) 

messages to be displayed. 

 

Force BIOS 

D

EFAULT

 

The system forces third party BIOS to display 

during system boot. 

 

Keep Current 

 

The system displays normal information during 

system boot. 

 

Bootup Num-Lock [On] 

Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be 

modified during boot up. 

 

Off  

Does not enable the keyboard Number Lock automatically. To 

use the 10-keys on the keyboard, press the Number Lock key 

located on the upper left-hand corner of the 10-key pad. The 

Number Lock LED on the keyboard lights up when the Number 

Lock is engaged. 

 

On D

EFAULT

 

Allows the Number Lock on the keyboard to be enabled 

automatically when the computer system boots up. This allows 

the immediate use of the 10-key numeric keypad located on 

the right side of the keyboard. To confirm this, the Number 

Lock LED light on the keyboard is lit. 

 

Boot From LAN [Disabled] 

The 

BOOT From LAN Support

 option enables the system to be booted from a remote 

system. 

 

Disabled D

EFAULT

 

Cannot be booted from a remote system through the 

LAN 

Содержание NANO-8522


























































































































































































































































Отзывы:

Нет отзывов