IEI Technology NANO-4386A2 Скачать руководство пользователя страница 32

Страница: 32 / 212

NANO-4386A2 Motherboard

Page 14

2.5 Intel

852GM Northbridge Chipset

2.5.1 Intel

852GM Overview

The Intel 852GM GMCH is a graphics memory controller hub (GMCH) component for

mobile platforms. It provides the processor interface, system memory interface

(DDR-SDRAM), Hub interface, CRT, LVDS, and one DVO port. An ACPI-compliant Intel

852GM chipset platform can support the Full-On (S0), Power On Suspend (S1-M),

Suspend to RAM (S3), Suspend to Disk (S4), and Soft-Off (S5) power management states.

Through the use of an appropriate LAN device, the chipset also supports wake-on LAN for

remote administration and troubleshooting. The Intel 852GM GMCH integrates the

following:

400-MHz processor Front Side Bus (FSB) controller

Graphics controller interface

Dual Channel 18 bit LVDS interface for TFT panel support

One Digital Video Out Port (DVO)

Supports DDR200/266 MHz memory technology

High-speed Accelerated Hub Architecture interface for communication with

the ICH4-M

2.5.2 Intel® 852GM Memory Support

The Intel® 852GM supports one 200-pin 1 GB (max.) 266 MHz single channel DDR

SO-DIMM. The memory socket is shown in

Figure 2-4

Figure 2-4: 200-pin SO-DIMM Socket

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 32 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: