IEI Technology Mustang-M2BM-MX2, Руководство пользователя

Страница: 19 / 98

Mustang-M2BM-MX2
Page 11
3.3 Hardware Installation
To install the Mustang-M2BM-MX2, please follow the steps below.
Step 1: Prepare the computer.
Turn off the computer, and remove the power cord from
the rear of the power supply.
WARNING:
Disconnect the computer from the power supply and from any networks
to which you will install the Mustang-M2BM-MX2, or you risk damaging
the system or experiencing electrical shock.
Step 2: Remove the cover from the chassis.
Step 3: Locate available M.2 2280 slot.
The Mustang-M2BM-MX2 is compatible with
M.2 2280 B+M key slot.
Step 4: Insert into the socket. Line up the notch on the module with the notch on the
slot. Slide the Mustang-M2BM-MX2 into the socket at an angle of about 20º.
Step 5: Secure the Mustang-M2BM-MX2 with a retention screw.
Step 6: Re-install the cover of the chassis .
Step 7: Reconnect any power cords and any network cables to the system. Power
up the system. Step 0: