background image

 

 

KINO-PVN-D5251/D4251/ Mini ITX SBC

Page 96 

Step 4: 

Turn on the system. 

Step 5: 

Press the <

F2

> key as soon as the system is turned on to enter the BIOS. 

Step 6: 

Select the connected optical disk drive as the 1

st

 boot device. (

Boot

 

 

Boot 

Device Priority

 

 

1

st

 Boot Device

). 

Step 7: 

Save changes and restart the computer. Continue to the next section for 

instructions on partitioning the internal storage.

  

S

te

p

 0

:

 

B.2.2 Create Partitions 

To create the system backup, the main storage device must be split into two partitions 

(three partitions for Linux). The first partition will be for the operating system, while the 

second partition will be invisible to the operating system and contain the backup made by 

the one key recovery software. 

Step 1: 

Put the recovery CD in the optical drive of the system.   

Step 2: 

Boot the system from recovery CD

. When prompted, press any key to boot 

from the recovery CD. It will take a while to launch the recovery tool. Please be 

patient!  

 

Figure B-2: Launching the Recovery Tool   

Содержание KINO-PVN-D5251



















































































































































Отзывы: