IEI Technology KINO-HM551 Скачать руководство пользователя страница 56

Страница: 56 / 126

KINO-HM551

Page 44

4.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the KINO-HM551 is installed. All

installation notices pertaining to the installation of the KINO-HM551

should be strictly adhered to. Failing to adhere to these precautions

may lead to severe damage of the KINO-HM551 and injury to the

person installing the motherboard.

4.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be carefully

followed in order to prevent damage to the KINO-HM551, KINO-HM551

components and injury to the user.

Before and during the installation please

the following:



Read the user manual:

The user manual provides a complete description of the KINO-HM551

installation instructions and configuration options.



Wear an electrostatic discharge cuff (ESD):

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.



Place the KINO-HM551 on an antistatic pad:

When installing or configuring the motherboard, place it on an antistatic

pad. This helps to prevent potential ESD damage.



Turn all power to the KINO-HM551 off:

Содержание KINO-HM551































































































































Результаты поиска

Содержание KINO-HM551

Отзывы:

IEI Technology KINO-HM551, Руководство пользователя, Страница: 56 / 126

Результаты поиска

Содержание KINO-HM551

Отзывы: