IEI Technology KINO-DH420, Руководство пользователя, Страница: 70 / 87

KINO-DH420 Mini-ITX Motherboard
Page 70
4.6 M.2 Module Installation
To install an M.2 module, please follow the steps below.
Step 1:
Locate the M.2 module slot. See Chapter 3 . Remove the on-board retention
screw.
Step 2:
Line up the notch on the module with the notch on the slot. Slide the M.2
module into the socket at an angle of about 20º ( Figure 4-7 ).
Figure 4-7: Inserting the M.2 Module into the Slot at an Angle
Step 3:
Secure the M.2 module with an M2*3 retention screw ( Figure 4-8 ).
Figure 4-8: Securing the M.2 Module