IEI Technology KINO-DH110, Руководство пользователя

Страница: 73 / 140

KINO-DH110 Mini-ITX Motherboard
Page 59
Step 4: Removing a SO-DIMM . To remove a SO-DIMM, push both handles outward.
The memory module is ejected by a mechanism in the socket. Step 0:
4.6 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of a full-size PCIe Mini card. To install a full-size
PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot . See Chapter 3 .
Step 2: Remove the retention screw . Remove the retention screw as shown in Figure 4-7 .
Figure 4-7: Removing the Retention Screw
Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch
on the slot. Slide the PCIe Mini card into the socket at an angle of about 20º
( Figure 4-8 ).