IEI Technology KINO-ABT-i2 Series, Руководство пользователя

Страница: 74 / 158

KINO-ABT-i2 Mini-ITX SBC
Page 60
4.2.3 PCIe Mini Card Installation
To install the PCIe Mini card, please refer to the diagram and instructions below.
NOTE:
The PCIe Mini card slot supports full-size and half-size PCIe Mini
cards. The following instruction diagrams take full-size cards as an
example to show users how to install. To install a half-size card, please
remove the corresponding retention screw.
Step 1: Locate the PCIe Mini card slot. Remove the preinstalled retention screw on the
screw pillar of the PCIe Mini card slot as shown in (
6
Figure 4-3) .
Figure 4-3: PCIe Mini Card Retention Screw Removal
Step 2: Line up the notch on the PCIe Mini card with the notch on the connector. Slide
the PCIe Mini card into the socket at an angle of about 20º.
Step 3: Push the other end of the PCIe Mini card down and secure the card with the
previously removed retention screw (
6
Figure 4-4 ).