IEI Technology KINO-ABT-i2 Series, Руководство пользователя

Страница: 73 / 158

KINO-ABT-i2 Mini-ITX SBC
Page 59
Figure 4-2: iRIS Module Installation
Step 1: Locate the iRIS module slot . See Figure 3-12 .
Step 2: Open the socket handles . Open the two handles outwards as far as they can.
See Figure 4-2 .
Step 3: Align the iRIS-2400 module with the socket . Align the iRIS-2400 module so
the notch on the module lines up with the notch on the socket. See Figure 4-2 .
Step 4: Insert the iRIS-2400 module . Once aligned, press down until the iRIS-2400
module is properly seated. Clip the two handles into place. See Figure 4-2 .
Step 5: Removing the iRIS-2400 module . To remove the iRIS-2400 module, push both
handles outward. The module is ejected by a mechanism in the socket.
NOTE:
After installing the iRIS-2400 module, use LAN1_USB1 port to
establish a network connection. Please refer to Section 4.5 for IPMI
setup procedures.