IEI Technology KINO-9152G4, Руководство пользователя, Страница: 108 / 232

KINO-9152G4 Mini-ITX Motherboard
Page 88
If the KINO-9152G4 fails to boot due to improper BIOS settings, the Clear CMOS Jumper
resets the system BIOS information. To do this, use the jumper cap to close pins 2 and 3
for a few seconds then reinstall the jumper clip back to pins 1 and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, it may be
corrected by pressing F1 to enter the CMOS Setup menu. Do one of the following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The Clear CMOS Jumper settings are shown in Table 5-3 .
AT Power Select Description
Short 1 - 2 Normal Default
Short 2 - 3 Clear CMOS Setup
Table 5-3: Clear CMOS Jumper Settings
The location of the Clear CMOS Jumper is shown in Figure 5-9 below.
Figure 5-9: Clear CMOS Jumper
5.4.3 CF Card Setup
Jumper Label: JP2