manualshive.com logo in svg

IEI Technology KINO-780AM2, Руководство пользователя, Страница: 49 / 131

Поделиться
Скачать
IEI Technology KINO-780AM2 Скачать руководство пользователя страница 49

 

 

KINO-780AM2 Motherboard 

Page 37 

4.3 CPU, CPU Cooling Kit and DIMM Installation 

 WARNING: 

A CPU should never be turned on without the specified cooling kit 

being installed. If the cooling kit (heat sink and fan) is not properly 

installed and the system turned on, permanent damage to the CPU, 

KINO-780AM2 and other electronic components attached to the 

system may be incurred. Running a CPU without a cooling kit may also 

result in injury to the user. 

The CPU, CPU cooling kit and DIMM are the most critical components of the 

KINO-780AM2. If one of these components is not installed the KINO-780AM2 cannot run. 

4.3.1 CPU Installation 

 WARNING: 

CPUs are expensive and sensitive components. When installing the 

CPU please be careful not to damage it in anyway. Make sure the CPU 

is installed properly and ensure the correct cooling kit is properly 

installed. 

To install a socket AM2 CPU onto the KINO-780AM2, follow the steps below: 

 WARNING: 

When handling the CPU, only hold it on the sides. DO NOT touch the 

pins at the bottom of the CPU. 

Содержание KINO-780AM2




































































































































Отзывы:

Нет отзывов