IEI Technology KINO-6612LVDS Скачать руководство пользователя страница 159

Страница: 159 / 227

KINO-6612 Mini-ITX Motherboard

Page 141

Enabled

OEM Logo displayed instead of POST messages

AddOn ROM Display Mode [Force BIOS]

The

AddOn ROM Display Mode

option allows add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

Allows the computer system to force a third party

BIOS to display during system boot.

Keep Current

Allows the computer system to display the

information during system boot.

Bootup Num-Lock [Off]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified

during boot up.

Off D

EFAULT

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

PS/2 Mouse Support [Enabled]

Use the

PS/2 Mouse Support

option adjusts PS/2 mouse support capabilities.

Содержание KINO-6612LVDS




































































































































































































































Результаты поиска

Содержание KINO-6612LVDS

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology KINO-6612LVDS, Руководство пользователя

Результаты поиска

Содержание KINO-6612LVDS

Отзывы:

Бренды по названию

Популярные бренды