42
4.11.1
NorthBridge Configuration
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set
according to the DRAM SPD (Serial Presence Detect). When
disabled, you can manually set the DRAM timing parameters
through the DRAM sub-items.
Configuration options: [Disabled] [Enabled]
Memory Hole [Disabled]
Configuration options: [Disabled] [15MB-16MB]
Init. Graphic Adapter Priority [Internal VGA]
Allows selection of the graphics controller to use as primary boot
device.
Configuration options: [Internal VGA] [AGP/Int-VGA] [AGP/PCI]
[PCI/AGP] [PCI/Int-VGA]
Internal Graphics Mode Select [Enable, 8MB]
Select the amount of system memory used by the internal
graphics device.
Configuration options: [Enable, 1MB] [Enable, 4MB] [Enable, 8MB]
[Enable, 16MB] [Enable, 32MB]
