IEI Technology IVS-300 Скачать руководство пользователя

Страница: 51 / 107

IVS-300 Embedded System

Page 37

Insert the utility CD into a CD drive connected to the system and install all of the

necessary drivers for the IVS-300.

3.13 Mobile AP

IEI provides an application tool, Mobile AP, for the users of the IVS-300 with the WWAN

module installed to manage mobile network and make a phone call.

3.13.1 Installation

To install this application tool, please locate the

WLAN

folder in the utility CD. This folder

contains two files for different operating systems.



IEI_Mobile_AP_Setup_x86_v1.01.exe

for 32-bit Windows OS



IEI_Mobile_AP_Setup_x64_v1.01.exe

for 64-bit Windows OS

Double click the .exe file that is corresponding to the OS version, then the system starts to

extract the file. After extracting, it starts to install the Bluetooth driver followed by the

installation of the WWAN module driver, and IEI Mobile AP application tool. It is

recommended to follow the step-by-step procedure to install all of these three

drivers/applications.

NOTE:

After installing the drivers and applications, the IVS-300 must be

restarted in order to complete the installation.

Содержание IVS-300












































































































Результаты поиска

Содержание IVS-300

Отзывы:

Похожие инструкции для IVS-300

Бренды по названию

Популярные бренды

IEI Technology IVS-300, Руководство пользователя

Результаты поиска

Содержание IVS-300

Отзывы:

Похожие инструкции для IVS-300

Бренды по названию

Популярные бренды