IEI Technology IVS-300, Руководство пользователя

Страница: 87 / 107

IVS-300 Embedded System
Page 73
Figure 5-1: SO-DIMM Locations
Step 3:
Remove the SO-DIMM by releasing the arms on the SO-DIMM socket.
Step 4:
Align the new SO-DIMM with the socket. The SO-DIMM must be oriented in
such a way that the notch in the middle of the SO-DIMM must be aligned with
the plastic bridge in the socket (
864
Figure 5-2
).
Step 5:
Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle
(
864
Figure 5-2
).
Figure 5-2: SO-DIMM Installation
Step 6:
Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down (See
864
Figure 5-2
).
Step 7:
Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket.
Step 0: