IEI Technology IVS-300-ULT3-i5/4G, Руководство пользователя

Страница: 50 / 110

IVS-300 Embedded System
Page 36
3.11.3 Power-on Procedure
To power-on the IVS-300 please follow the steps below:
Step 1: Connect the power source to the power connector to provide power to the
system.
Step 2: Push the power button until the power LED lights on in green ( Figure 3-28 ).
Step 0:
Figure 3-28: Power Button
3.12 Driver Installation
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
All the drivers for the IVS-300 are on the utility CD that came with the system. The utility
CD contains drivers for Windows 7 and Windows 8 operating systems. Please select the
corresponding drivers for the system.
The following drivers can be installed on the Windows 7 operating system:

Chipset

Graphics