IEI Technology IVS-100-BT Скачать руководство пользователя страница 58

Страница: 58 / 120

IVS-100-BT Advanced Auto Data Server

Page 46

4.3.5 SMS/RTC Wake Settings

The

SMS/RTC Wake Settings

menu (

BIOS Menu 8

) enables the system to wake at the

specified time.

Advanced

Wake system with SMS

[Disabled]

Wake system with Fixed Time

[Disabled]

Enable or disable System
SMS wake on. When
enabled, System will
wake by SMS event.

----------------------

: Select Screen

↑

↓

: Select Item

Enter: Select
+/-: Change Opt.
F1: General

Help

F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

BIOS Menu 8: SMS/RTC Wake Settings

Wake system with SMS [Disabled]

Use the

Wake system with SMS

option to enable or disable the system wake on SMS

event.

Disabled D

EFAULT

The SMS cannot generate a wake event

Enabled

The SMS can generate a wake event

Wake system with Fixed Time [Disabled]

Use the

Wake system with Fixed Time

option to enable or disable the system wake on

alarm event.

Disabled D

EFAULT

The real time clock (RTC) cannot generate a wake

event

Enabled

If selected, the

Wake up every day

option appears

Содержание IVS-100-BT

























































































































Результаты поиска

Содержание IVS-100-BT

Отзывы:

IEI Technology IVS-100-BT, Руководство пользователя, Страница: 58 / 120

Результаты поиска

Содержание IVS-100-BT

Отзывы: