iSignager-300/300WL
Page 28
interface < eth0 > is up and running
==================================================
the systems ip address is :192.168.1.10
connecting to windows server..............
windows server ip address is : 192.168.1.5
windows server hostname is : RD-VICKWU-NB
error status-w: Contact iEi code=0x05 failed
connection = Y
CONNECTED TO WINDOWS SERVER!
==================================================
iEi WCODE 1 0x05 0x02
iEi RCODE 1 0x05 0x02
==================================================
Mac address of the board is :#00:9b:6b:36:a8:70
Default gateway of the board is :192.168.1.1
Subnet mask is :255.255.255.0
Host name is :vick
DNS of the board is :127.0.0.1
==================================================
#00:9b:6b:36:a8:70#192.168.1.10#127.0.0.1#vick#192.168.1.1#255.255.255.
0#0#0#0##read returned : 20
A.1.2 Successful Message—Wifi Connection
If Wifi is successfully connected, the following messages are shown.
eth0: link down
ra0
killall: udhcpc: no process killed
Found RT61 Wifi Card
12:34:56:78:90:00:00:00:00:00:00:00:00:00:00:00:
RT61: RfIcType= 3
Probing for Wifi Card......
inf_name ra0
Содержание iSignager 300WL
