IEI Technology IQ7-US15W Скачать руководство пользователя страница 118

Страница: 118 / 139

IQ7 Design Guide

Page 106

AddOn ROM Display Mode [Force BIOS]

Use the

AddOn ROM Display Mode

option to allow add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

The system forces third party BIOS to display

during system boot.

Keep Current

The system displays normal information during

system boot.

Bootup Num-Lock [On]

Use the

Bootup Num-Lock

BIOS option to specify if the number lock setting must be

modified during boot up.

Off

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

On D

EFAULT

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

Boot From LAN Support [Disabled]

Use the

Boot From LAN Support

option to enable the Ethernet controller to boot the

system.

Enabled

Disabled

EFAULT

Содержание IQ7-US15W












































































































































Результаты поиска

Содержание IQ7-US15W

Отзывы:

IEI Technology IQ7-US15W, Руководство пользователя, Страница: 118 / 139

Результаты поиска

Содержание IQ7-US15W

Отзывы: