IEI Technology iQ7-BT, Руководство пользователя

Страница: 29 / 82

iQ7-BT Qseven Module
Page 21
NOTE:
The
TXE
BIOS option (refer to
Section 4.3.10
) must be disabled when
the user needs to flash BIOS in the following situations:
1. Flash the BIOS of the baseboard (IQ7-DB-MATX).
2. Flash the BIOS of the newly installed iQ7-BT module.
Follow the steps below to install the iQ7-BT to the optional baseboard.
Step 1:
Align the Qseven connector on the edge of the iQ7-BT with the corresponding
socket on the baseboard. Slide the iQ7-BT into the socket at an angle of about
20º. (Figure 3-2).
Figure 3-2: Connect the Qseven Connectors
Step 2:
Ensure a thermal pad is placed on the CPU of the iQ7-BT.
Step 3:
Place the heatsink on the iQ7-BT, aligning the retention screw holes and gently
pushing the heatsink down.
Step 4:
Secure the heatsink to the iQ7-BT and the baseboard with the supplied retention
screws (Figure 3-3).