IEI Technology IOWA-MARK-533-128MB-R10 Скачать руководство пользователя страница 91

Страница: 91 / 216

IOWA-MARK Half-size CPU Card

Page 75

5.6 Chassis Installation

5.6.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the IOWA-MARK must have air

vents to allow cool air to move into the system and hot air to move out.

The IOWA-MARK must be installed in a chassis with ventilation holes on the sides

allowing airflow to travel through the heat sink surface. In a system with an individual

power supply unit, the cooling fan of a power supply can also help generate airflow

through the board surface.

NOTE:

IEI has a wide range of backplanes available. Please contact your

IOWA-MARK vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.6.2 Backplane Installation

Before the IOWA-MARK can be installed into the chassis, a backplane must first be

installed. Please refer to the installation instructions that came with the backplane and the

chassis to see how to install the backplane into the chassis.

Содержание IOWA-MARK-533-128MB-R10

























































































































































































































Результаты поиска

Содержание IOWA-MARK-533-128MB-R10

Отзывы:

IEI Technology IOWA-MARK-533-128MB-R10, Руководство пользователя, Страница: 91 / 216

Результаты поиска

Содержание IOWA-MARK-533-128MB-R10

Отзывы: