IEI Technology IOPS-Q67/H61, Руководство пользователя

Страница: 52 / 70

IOPS-Q67/H61 Pluggable Module PC
Page 42
Step 5: Push down until the card clips into place
. Push the other end of the card
down until it clips into place on the plastic connector.
Step 0:
5.2.2 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the IOPS-Q67/H61. Please make sure the purchased SO-DIMM
complies with the memory specifications of the IOPS-Q67/H61.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1: Remove the SO-DIMM access panel.
Place the IOPS-Q67/H61 on an
anti-static pad with the bottom panel facing up. Remove the SO-DIMM access
panel retention screw shown in
Figure 5-4
.
Figure 5-4: SO-DIMM Access Panel Retention Screw
Step 2: Remove the SO-DIMM access panel
and locate the SO-DIMM.