IEI Technology IMBA-XQ354 Скачать руководство пользователя

Страница: 90 / 245

IMBA-XQ354 Motherboard

Page 70

5.3 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU,

IMBA-XQ354 and other electronic components attached to the system

may be incurred. Running a CPU without a cooling kit may also result

in injury to the user.

The CPU, CPU cooling kit and DIMM are the most critical components of the IMBA-XQ354.

If one of these component is not installed the IMBA-XQ354 cannot run.

5.3.1 Socket LGA775 CPU Installation

NOTE:

To enable Hyper-Threading Technology, the CPU, chipset and

operating system must all support Hyper-Threading Technology.

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

The LGA775 socket is shown in

Figure 5-1

Содержание IMBA-XQ354






















































































































































































































































Результаты поиска

Содержание IMBA-XQ354

Отзывы:

Похожие инструкции для IMBA-XQ354

Бренды по названию

Популярные бренды

IEI Technology IMBA-XQ354, Руководство пользователя

Результаты поиска

Содержание IMBA-XQ354

Отзывы:

Похожие инструкции для IMBA-XQ354

Бренды по названию

Популярные бренды