3
E8500 3.16GHz with DDR2 800MHz 2GB DRAM x4) 3D Mark
2001SE
Operating Temperature: 0 ~ 60
°
C( 32 ~ 140
°
F)
Operating Humidity: 5%~95% non-condensing
Dimension: 305mm x 244mm
Weight: GW:1200g, NW:600g
Ordering Information
IMBA-Q454-R10:
&'(
)
*
+,&--.
!"#$%
*
,)/ $&'&**
0&*
1$% 2
3 4
! &
SDVO-100VGA-R10:
PCIex16 VGA output SDVO Card support dual display(IEI board only)
SDVO-100DVI-R10:
PCIex16 DVI output SDVO Card support dual display(IEI board only)
CF-775A-RS:
CPU Cooler
CF-520-RS:
CPU Cooler
32200-000017-RS:
FDD Cable
32100-088600-RS:
SATA Power Cable
CB-USB02-RS:
Dual Ports USB Cable with Bracket
CB-USB14-RS:
4 Ports USB Cable with Bracket
NOTICE
1) Before removing the DDR2 DRAM module, make sure the AC power is
completely turned off. Incorrect usage may cause permanently damage to
the IMBA-Q454 or the DRAM module. This is because the IMBA-Q454
supports iAMT feature and need to provide power to the DRAM module
when the IMBA-Q454 is off.
2) Do not disconnect the ATX connector when the IMBA-Q454 is powered
on and running. Please make sure to switch off the ATX power supply
prior to disconnect the ATX connector. Incorrect usage may cause
permanently damage to the IMBA-Q454.
3) If the IMBA-Q454 fails to boot due to improper usage, please clear the
CMOS by disconnect the battery from the connector.
