IEI Technology IMBA-Q370-R20 Скачать руководство пользователя страница 95

Страница: 95 / 163

IMBA-Q370 ATX Motherboard

Page 79

5.1.5 BIOS Menu Bar

The

menu bar

on top of the BIOS screen has the following main items:



Main – Changes the basic system configuration.



Advanced – Changes the advanced system settings.



Chipset – Changes the chipset settings.



Security – Sets User and Supervisor Passwords.



Boot – Changes the system boot configuration.



Save & Exit – Selects exit options and loads default settings



Server Mgmt – Configures system event log and BMC network parameters

The following sections completely describe the configuration options found in the menu
items at the top of the BIOS screen and listed above.

5.2 Main

The

Main

BIOS menu (

BIOS Menu 1

) appears when the

BIOS Setup

program is entered.

The

Main

menu gives an overview of the basic system information.

Содержание IMBA-Q370-R20




































































































































































Результаты поиска

Содержание IMBA-Q370-R20

Отзывы:

IEI Technology IMBA-Q370-R20, Руководство пользователя, Страница: 95 / 163

Результаты поиска

Содержание IMBA-Q370-R20

Отзывы: