IEI Technology IMBA-C604EN Скачать руководство пользователя страница 156

Страница: 156 / 198

IMBA-C604EN ATX Mo th e rb o a rd

P a g e 141

NOTE:

Use the following commands to check if the partitions were created

successfully.

S te p 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build the Recovery Partition.

Step

B.2.3

In s ta ll Op e ra tin g S ys te m , Drive rs a n d Ap p lic a tio n s

Install the operating system onto the unlabelled partition. The partition labeled "Recovery"

is for use by the system recovery tool and should not be used for installing the operating

system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Содержание IMBA-C604EN







































































































































































































Результаты поиска

Содержание IMBA-C604EN

Отзывы:

IEI Technology IMBA-C604EN, Руководство пользователя, Страница: 156 / 198

Результаты поиска

Содержание IMBA-C604EN

Отзывы: