IEI Technology IMBA-9454 Скачать руководство пользователя страница 3

Страница: 3 / 228

IMBA-9454 Motherboard

Page iii

Copyright

COPYRIGHT NOTICE

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

TRADEMARKS

IBM PC is a registered trademark of International Business Machines Corporation. INTEL

is a registered trademark of INTEL Corporation. Other product names mentioned herein

are used for identification purposes only and may be trademarks and/or registered

trademarks of their respective owners.

Содержание IMBA-9454





































































































































































































































Результаты поиска

Содержание IMBA-9454

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IMBA-9454, Руководство пользователя

Результаты поиска

Содержание IMBA-9454

Отзывы:

Бренды по названию

Популярные бренды