IEI Technology IKARPC-07A-BT, Руководство пользователя

Страница: 21 / 108

IKARPC-07A-BT In-vehicle Panel PC
Page 11
To unpack the panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the system has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1:
Open the external box.
Step 2:
Remove the two polystyrene strips that cover the system.
Step 3:
Lift the IKARPC-07A-BT out of the boxes.
Step 4:
Take the IKARPC-07A-BT out from the plastic bag.
Step 5:
Pull the plastic cover off the IKARPC-07A-BT.
Step 6:
Make sure all the components listed in the packing list are present.
2.1 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
IKARPC-07A-BT was purchased from or contact an IEI sales
representative directly by sending an email to
31
sales@ieiworld.com .
The IKARPC-07A-BT is shipped with the following components: