IEI Technology IKARPC-07A-A9, Руководство пользователя

Страница: 40 / 99

IKARPC-07A-A9 In-vehicle Panel PC
Page 28
4.1 Power-On/Off Procedure
4.1.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the system please make sure of the following:

The rear cover is installed

All peripheral devices (antenna, serial communications devices etc.) are
connected

The system is securely mounted

The power cables are plugged in
4.1.2 Power-on Procedure
To power-on the IKARPC-07A-A9 please follow the steps below:
Step 1:
Connect either the ACC power cable or the optional cigarette lighter power cable
from the IKARPC-07A-A9 to the vehicle. See
Section 3.7.4
.
Step 2:
Start the vehicle, and the IKARPC-07A-A9 will be turned on automatically after
10 seconds
. The power LED lights up in blue when the system is turned on. The
user can also hold down the power button on the top panel for
4~6 seconds
to
turn on the system when the key is in ACC or ON position. The following table
shows the relation of the power state and vehicle ignition system.