IEI Technology IEM-LX страница 50 Скачать руководство пользователя

Страница: 50 / 140

IEM-LX-800 ETX CPU Module

5.1 Installation Considerations

NOTE:

The following installation notices and installation considerations should be

read and understood before the CPU module is installed. All installation

notices pertaining to the installation of the CPU module should be strictly

adhered to. Failing to adhere to these precautions may lead to severe

damage of the CPU module and injury to the person installing the CPU

module.

5.1.1 Installation Notices

Before and during the installation of the IEM-LX, please do the following:

Read the user manual

The user manual provides a complete description of the IEM-LX,

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD)

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the CPU module on an antistatic pad

When installing or configuring the CPU module, place it on an antistatic

pad. This helps to prevent potential ESD damage.

Turn off all power to the IEM-LX

When working with the CPU module, make sure that it is disconnected

from all power supplies and that no electricity is being fed into the system.

Before and during the installation of the IEM-LX DO NOT:

remove any of the stickers on the PCB board. These stickers are required for

warranty validation.

use the product before verifying all the cables and power connectors are

Page 50

Содержание IEM-LX













































































































































Результаты поиска

Содержание IEM-LX

Отзывы:

Похожие инструкции для IEM-LX

Бренды по названию

Популярные бренды

IEI Technology IEM-LX, Руководство пользователя

Результаты поиска

Содержание IEM-LX

Отзывы:

Похожие инструкции для IEM-LX

Бренды по названию

Популярные бренды