IEI Technology IDS-H61, Руководство пользователя

Страница: 54 / 72

IDS-H61 Digital Signage Player
Page 44
Step 1:
Remove the top cover by removing the four retention screws on both side panels
(two on each side). See
Figure 5-1
.
Step 2:
Locate the SO-DIMM. (
83
Figure 5-4
).
Figure 5-4: SO-DIMM Removal
Step 3:
Remove the SO-DIMM by releasing the arms on the SO-DIMM socket. Align the
new SO-DIMM with the socket. The SO-DIMM must be oriented in such a way
that the notch in the middle of the SO-DIMM must be aligned with the plastic
bridge in the socket (
83
Figure 5-5
).
Step 4:
Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle
(
83
Figure 5-5
).
Figure 5-5: SO-DIMM Installation
Step 5: Secure the SO-DIMM
. Press the SO-DIMM down until the arms of the
SO-DIMM socket clip into place and secure the SO-DIMM in the socket.
Step 0: