IEI Technology IDS-310AI, Руководство пользователя

Страница: 39 / 109

IDS-310AI Embedded System
Page 25
3.8 Power-On Procedure
3.8.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the IDS-310AI please make sure of the following:

The bottom surface panel is installed

All peripheral devices (monitor, serial communications devices etc.) are
connected

The power cables are plugged in

The system is securely mounted
3.8.2 Power-on Procedure
To power-on the IDS-310AI, please follow the steps below.
Step 1: Connect the power source to the power input jack.
Step 2: Push the power button ( Figure 3-16 ).
Step 3: Once turned on, the power LED indicator should turn on in green. Step 0:
Figure 3-16: Power Button and Power LED