IEI Technology IDS-200-A70Mi, Руководство пользователя, Страница: 34 / 89

IDS-200-A70Mi Digital Signage Player
Page 22
Figure 3-12: IPMI Module Installation
Step 4:
Insert the iRIS-2400 module. Push the module in at a 20º angle (
Figure 3-12
).
Step 5:
Seat the iRIS-2400 module. Gently push downwards and the arms clip into
place (
Figure 3-12
).
Step 6:
After installing the iRIS-2400 module, refer to
Section 3.9
for IPMI setup
procedure.
3.7 Mounting the System
To mount the IDS-200-A70Mi onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1:
Turn the embedded system over.
Step 2:
Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface.
Step 3:
Secure the brackets to the system by inserting two retention screws into each
bracket.