IEI Technology IDDUPS-6364120A/636260A Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 52

IEI Technology IDDUPS-6364120A/636260A Скачать руководство пользователя страница 17

IDDUPS Series DC/DC Converter Module

Page 17

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

IDDUPS-6364120/636260 may result in permanent damage to the

IDDUPS-6364120/636260 and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the IDDUPS-6364120/636260. Dry climates are especially susceptible to ESD. It

is therefore critical that whenever the IDDUPS-6364120/636260, or any other electrical

component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the IDDUPS-6364120/636260,

place it on an antic-static pad. This reduces the possibility of ESD damaging

the IDDUPS-6364120/636260.

Only handle the edges of the PCB

: When handling the PCB, hold the PCB

by the edges.

3.2 Unpacking

3.2.1 Unpacking Precautions

When the IDDUPS-6364120/636260 is unpacked, please do the following:

Follow the anti-static precautions outlined in

Section

193H193H193H196H

3.1

.

Make sure the packing box is facing upwards so the

IDDUPS-6364120/636260 does not fall out of the box.

Make sure all the components shown in

Section

194H194H194H197H

3.3

are present.

«
...
15
16
17
18
19
...
»

Содержание IDDUPS-6364120A/636260A





















































Отзывы:

Нет отзывов