36
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can
manually set the DRAM timing parameters through the DRAM sub-items.
Configuration options: [Disabled] [Enabled]
Memory Hole [Disabled]
Configuration options: [Disabled] [15MB-16MB]
Internal Graphics Mode Select [Enable, 8MB]
Select the amount of system memory used by the internal graphics device.
Configuration options: [Enable, 1MB][Enable, 8MB]
Aperture Size Select [256MB]
Allows you to select the size of mapped memory for AGP graphic data.
Configuration options:[128MB] [256MB]
PEG Port Configuration
PEG Port [Enable]
PEG Port VC1/Map [Enable/TC7]
[Disable] [Enable/TC1] [Enable/TC2] [Enable/TC3] [Enable/TC4]
[Enable/TC5] [Enable/TC6] [Enable/TC7]
PEG Force x1 [Disable]
[Enable/TC1] [Enable/TC2] [Enable/TC3] [Enable/TC4] [Enable/TC5]
[Enable/TC6] [Enable/TC7]
4.11.2
South Bridge Configuration
On Board AC’97 Audio [Auto]
Allows you to enable or disable the AC’97 Audio.
Configuration options: [Auto] [Disabled]
SMBUS Controller[Enable]
Allows you to enable or disable the SMBUS Controller.
Configuration options: [Enable] [Disabled]
CHAP Controller[Enable]
Configuration options: [Enable] [Disabled]
