IEI Technology IceCare-10W series Скачать руководство пользователя страница 26

Страница: 26 / 107

ICECARE-10W Mobile Sales Assistant

Page 14

3.1 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before installation. All installation notices must

be strictly adhered to. Failing to adhere to these precautions may lead

to severe damage and injury to the person performing the installation.

WARNING:

The installation instructions described in this manual should be

carefully followed in order to prevent damage to the components and

injury to the user.

Before and during the installation please

the following:



Read the user manual

The user manual provides a complete description of the ICECARE-10W

Series installation instructions and configuration options.



Wear an electrostatic discharge cuff (ESD)

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.



Place the ICECARE-10W Series on an antistatic pad

When installing or configuring the motherboard, place it on an antistatic pad.

This helps to prevent potential ESD damage.



Turn all power to the ICECARE-10W Series off

When working with the ICECARE-10W Series, make sure that it is

disconnected from all power supplies and that no electricity is being fed into

the system.

Before and during the installation of the ICECARE-10W Series

DO NOT:

Содержание IceCare-10W series












































































































Результаты поиска

Содержание IceCare-10W series

Отзывы:

Похожие инструкции для IceCare-10W series

Бренды по названию

Популярные бренды

IEI Technology IceCare-10W series, Руководство пользователя

Результаты поиска

Содержание IceCare-10W series

Отзывы:

Похожие инструкции для IceCare-10W series

Бренды по названию

Популярные бренды