IEI Technology HTB-100-HM170, Быстрое руководство по установке

Страница: 8 / 16

7
Powering On the System
WARNING:
To avoid risk of electric shock, this equipment must only be connected to
supply mains with protective earth.
CAUTION:
The power adapter came with the HTB-100-HM170 is a forming part of
the medical device.
CAUTION:
Position the power cord so that people cannot step on it. Do not place
anything over the power cord. If the equipment is not used for a long
time, disconnect it from the power source to avoid damage by transient
over voltage.
Step 1: Connect the power cord to the power adapter. Connect the other
end of the power cord to a power source.
Step 2: Connect the power adapter to the power connector of the
HTB-100-HM170.
Step 3: Short-press the power button on the front panel until the power
LED lights on in blue.
Shutdown Procedure
Turn off the power and disconnect the power cord.
To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket. To fully disengage the power to the unit,
please disconnect the power cord from the AC outlet. Refer servicing to
qualified service personnel. The AC outlet shall be readily available and
accessible.