IEI Technology HSC-13Mx Скачать руководство пользователя страница 26

Страница: 26 / 72

Page 18

HSC-13Mx Industrial Camera

4.1 Overview

The IEI HSC allows configuration of the HSC-13Mx via a computer. Refer to the following

sections for detailed information.

NOTE:

The IEI HSC supports the OS versions listed below:



Microsoft® Windows® 7 (32-bit & 64-bit)



Microsoft® Windows® 8.1 (32-bit & 64-bit)



Microsoft® Windows® 10 (32-bit & 64-bit)

4.2 Application Installation

By installing the IEI HSC utility, the IEI HSC AP and camera device driver will be installed

simultaneously. Please follow the steps below to proceed with installation. If the older

version of the IEI HSC is already installed, please refer

Section 4.2.1

to uninstall it.

NOTE:

To obtain the IEI HSC setup file, please visit the IEI website.

Step 1:

Connect the HSC-13Mx to the computer via the USB 3.0 connector.

Step 2:

Double click the

IEI_HSCam_SDK_Vx.x.x.xxxx_yyyymmdd.exe

setup file

downloaded from the IEI website.

Содержание HSC-13Mx









































































Результаты поиска

Содержание HSC-13Mx

Отзывы:

IEI Technology HSC-13Mx, Руководство пользователя, Страница: 26 / 72

Результаты поиска

Содержание HSC-13Mx

Отзывы: