-
Plug the dongle jack into the headset jack.
-
Hold the dongle on the phone in the position that you wish to permanently mount the plate.
-
Make a call and make sure you are happy with the quality of the call. If there is a buzz, move the dongle’s position a bit until the buzz
disappears.
-
Now you can mount the plate using the supplied tape.
Belt Clip
You can use the belt clip instead of the mounting plate. Simple place the clip over the smooth side of the clip receiver plate and twist into position. Now the
Dongle can be mounted to the clip plate.
Removing Base Unit From Cellphone
Simply press the small lever on the side of the plate down and slide the dongle off the plate.
Proper Headset Placement
Headset can be positioned in any way that is comfortable to you. The mic tube does not have to be positioned in any particular way for the product to work.
Ear Gels
HeadOn allows you to choose the ear gel, which fits your ear best. If you wish, you can also trim the non-ribbed side of the gel with scissors to make it a
bit shorter to fit you best.
Range
HeadOn features extended range between the headset and dongle. The range is dependent on the environment and RF noise. It can be between 10 and 50
feet.
Out Of Range Indication
If the sound becomes noisy and HeadOn us unable to automatically mitigate it, move closer to the dongle.
Water Damage
HeadOn is not waterproof. If exposed to water, remove and discard the batteries and wait for the unit to completely dry. The unit will not be damaged.
Purchasing additional and spare parts
