IEI Technology GRAND-C610-20C, Руководство пользователя

Страница: 23 / 63

GRAND-C610-20C
Page 15

Do not mix RDIMMs and LRDIMMs.

Blue memory slots denote the first slot of a channel (A0, B0, C0 and D0).

Memory modules should be populated starting farthest from the processor on
each channel.

IEI recommends installing the number of memory modules dividable by 4 at
the same time because each processor supports 4 channels.

When 4 memory modules are installed, use P0-A0, P0-C0, P1-A0, and
P1-C0.

When 8 memory modules are installed, use P0-A0, P0-B0, P0-C0, P0-D0,
P1-A0, P1-B0, P1-C0, and P1-D0.

When 12 memory modules are installed, use P0-A0, P0-B0, P0-C0, P0-D0,
P0-A1, P0-C1, P1-A0, P1-B0, P1-C0, P1-D0, P1-A1, and P1-C1.
To install a memory module:
Step 1: Turn off the GRAND-C610-20C. Disconnect the power adaptor, network cable(s),
and any other connectors or cables from the GRAND-C610-20C.
Step 2: Put on an antistatic wrist strap to prevent electrostatic discharge. The crocodile
clip should be connected to the ground.
Step 3: Loosen the 2 screws on the rear of the GRAND-C610-20C as shown below.
Step 4: Hold the handle and pull backwards to remove the Motherboard Drawer.