IEI Technology eKINO-BT, Руководство пользователя

Страница: 73 / 157

eKINO-BT Mini-ITX SBC
Page 59
4.3 SO-DIMM Installation
To install a SO-DIMM, please follow the steps below and refer to Figure 4-1 .
NOTE:
Use DIMM1 slot when installing one SO-DIMM. For the SO-DIMM slot
location, refer to Figure 3-28 .
Figure 4-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket on the solder side of the eKINO-BT. Place the
board on an anti-static mat.
Step 2: Align the SO-DIMM with the socket . Align the notch on the memory with the
notch on the memory socket.
Step 3: Insert the SO-DIMM . Push the memory in at a 20º angle. (See Figure 4-1 )
Step 4: Seat the SO-DIMM . Gently push downwards and the arms clip into place. (See
Figure 4-1 ) Step 0:
4.4 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card.
To install a full-size PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot . See Figure 3-20 .