IEI Technology ECW-281B-BTi, Руководство пользователя

Страница: 92 / 135

ECW-281B-BTi Embedded System
Page 78
Step 2:
Check that the power cable connector is properly plugged into the power source.
Step 3:
Make sure the power button is turned on.
Step 4:
Plug the system into a monitor and check to see if anything appears on the
screen. If the boot-up screen appears it means the power LED has become
disconnected. To fix this problem, open the top cover and reconnect the power
LED to the motherboard.
Step 0:
If the above steps have been completed and the system still doesn’t turn on, please do the
following.
Step 1:
Open the bottom surface (
Section
865
3.4
)
Step 2:
Check the terminal block/power socket power cable connector is properly
connected to the power module or motherboard.
Step 3:
Check that the power button cable connector is properly connected to the
motherboard.
Step 4:
Make sure the cable connecting to the terminal block/power socket are properly
attached and have not become separated.
Step 5:
Make sure the cable connecting the power button to the motherboard is still
properly attached to the power button and has not been separated.
Step 0:
5.2.2 The System Doesn’t Boot Up
If the system doesn’t boot up please do the following:
Step 1:
Check the power is turned on. See
Section
865
5.2.1
above.
Step 2:
Make sure the SO-DIMM module is properly installed.
Step 3:
Reset the system using the reset CMOS jumper.
Step 0: