IEI Technology ECN-380-QM87, Руководство пользователя

Страница: 18 / 84

ECN-380-QM87 Em b e d d e d S ys te m
P a g e 10
2.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the ECN-380-QM87 and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the ECN-380-QM87. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the ECN-380-QM87 or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Touch any grounded conducting material before handling
the board. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the ECN-380-QM87, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
ECN-380-QM87.
2.2 Un pa c kin g P re c a u tio n s
When the ECN-380-QM87 is unpacked, please do the following:

Follow the anti-static precautions outlined in Section 2.1 .

Make sure the packing box is facing upwards so the ECN-380-QM87 does not
fall out of the box.

Make sure all the components shown in Section 2.3 are present.