IEI Technology ECN-360A-ULT3, Руководство пользователя

Страница: 68 / 131

E C N-360A-ULT3 E mbedded S ys tem
P age 55
C N L ocation:
See Figure 4-33
If the ECN-360A-ULT3 fails to boot due to improper BIOS settings, use the button to clear
the CMOS data and reset the system BIOS information.
The location of the clear CMOS button is shown in Figure 4-33
Figure 4-33: Clear CMOS Button Location
4.4.3 F las h Des criptor S ecurity Override J umper
C N L abel: ME_FLASH1
C N T ype:
2-pin header, p=2.00 mm
C N L ocation:
See Figure 4-34
C N S ettings : See Table 4-32
The Flash Descriptor Security Override jumper (ME_FLASH1) allows to enable or disable
the ME firmware update. Refer to
Figure 4-34 and Table 4-32 for the jumper location and
settings.
Setting Description
Open Disabled (default)
Short Enabled
Table 4-32: Flash Descriptor Security Override Jumper Settings